Table of Contents
Advertisement
4. Install the optical drive retainer onto the left side of the new optical drive.
Figure 29. Installing the optical drive retainer
5. Slide the new optical drive into the drive bay from the front of the computer until the optical drive
snaps into position.
Figure 30. Installing the optical drive
6. Connect the cables to the rear of the new optical drive.
Figure 31. Connecting the cables to the rear of the new optical drive
7. If you are installing a new optical drive, remove the plastic panel in the front bezel for the desired
drive bay.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
.
Chapter 7
Installing or replacing hardware
71
Advertisement
Table of Contents
