Table of Contents
Advertisement
3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer
cover engage the rails on the chassis. Then, push the cover to the front of the computer until it snaps
into position.
Figure 57. Reinstalling the computer cover
4. Install the screws to secure the computer cover.
5. Place the computer in an upright position.
6. If there is any locking device available, lock the computer cover. See "Locking your computer" on
page 27.
7. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 1.
8. Update the configuration of your computer if necessary. See "Using the Setup Utility program" on
page 33.
9. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping your computer current" on page 24.
88
ThinkStation P410 User Guide
Advertisement
Table of Contents
