Safety And Handling Precautions - Canon ME200S-SH Instruction Manual

Safety and Handling Precautions

Safety and Handling Precautions
Be sure to observe the following precautions to ensure maximum performance.
• Do not use, store or leave the camera in places subject to high temperatures (60 °C (140 °F) or
higher) or the inside of a car parked under direct sunlight.
• Do not use the camera near strong electromagnetic fields such as near powerful magnets and
motors, MRI machines or high-voltage power lines. Using the camera in such places may cause
anomalies in the video, or audio or video noise to appear.
8
• Do not use or store the camera in dusty or sandy places. The camera is not waterproof – avoid also
water, mud or salt. If any of the above should get into the camera it may damage the camera and/or
the lens. Consult a Canon Service Center as soon as possible.
• Be careful to avoid dust and dirt particles accumulating on the lens or entering the camera. When
you finish using the camera, make sure to attach the body cap to the lens mount and the lens cap
and dust cap to the lens.
• Have the cooling fan replaced after the [Total] hour meter displayed in the [Other Functions] >
[Reset Hour Meter] submenu reaches approximately 30,000 hours. Consult a Canon Service Center
to have it replaced.
• Do not point the camera toward an intense light source, such as the sun on a sunny day or an
intense artificial light source. Doing so may damage the image sensor or the camera's internal
components. Be careful especially when using a tripod. When you are not using the camera, make
sure to attach the lens cap to the lens.
• Be careful of heat generated by lighting equipment.
• Do not disassemble the camera. If the camera does not function properly, consult qualified service
personnel.
• Do not touch the lens contacts on the lens mount. Dirty contacts may
cause a poor contact between the camera and the lens resulting in
incorrect operation of the camera. After removing the lens, make sure to
attach the body cap to the lens mount and the lens cap and dust cap to
the lens.
• Make sure to turn off the camera before disconnecting a power cable.
• Handle the camera with care. Do not subject the camera to shocks or
vibration as this may cause damage.
• Long-term storage: If you do not intend to use the camera for a long time, store it in a place free of
dust, in low humidity, and at temperatures not higher than 30 °C (86 °F).
Before Using the Camera
Note the following before using the camera.
Privacy and Publicity Rights
When using the camera (for video or audio recording), it is the full responsibility of the user to avoid
any violation of privacy or publicity rights. For example, obtain consent to install the camera in
advance if specific buildings or rooms are to be monitored. Canon shall have no liability whatsoever
in this regard.
Legal Notice
In some cases camera monitoring may be prohibited by law or regulation, the details of which differ
by country or region. Before using the camera, check the laws and regulations of the country or
region where the camera is to be used.