Table of Contents
Advertisement
Adjusting the Focus
General Notes regarding Focus Functions
NOTES
• If you operate the zoom after focusing, the focus on the subject may be lost.
• When adjusting the focus, be careful not to touch the front of the lens or moving parts on the lens
except for the focus ring.
46
• About the autofocus (AF) functions:
- Autofocus may not work well when high gain levels are set.
- Autofocus may not work well when [Custom Picture] > [Fine Tuning] > [Gamma] is set to
[Wide DR] or [Canon Log].
- The point where the camera focuses may change slightly depending on shooting conditions,
such as subject, brightness and zoom position. Check the focus before resuming shooting.
• Autofocus may take longer in the following cases.
- When the frame rate is set to 29.97P, 25.00P or 23.98P.
- With some EF lenses, the camera may take longer to focus automatically or may not be able to
focus correctly. Visit your local Canon Web site for the latest information.
• Autofocus may not work well on the following subjects or in the following cases. In such case, focus
manually.
- Reflective surfaces
- Subjects with low contrast or without vertical lines
- Fast moving subjects
- Through dirty or wet windows
- Low-light scenes
- Subjects with a repetitive pattern
Advertisement
Table of Contents
