Table of Contents
Advertisement
Menu Options
[Custom Picture] menu
Menu item
[Select File]
[Fine Tuning]
64
[Audio/Video Setup] menu
Menu item
[MIC Power]
[1kHz Tone]
[3G-SDI Mapping]
[Rec Command]
[Other Functions] menu
Menu item
[Reset]
[Off], [CP1] to [CP6], [EOS Std.], [Wide DR], [Canon Log]
Selects a custom picture file to apply its settings while shooting or to edit it.
See the detailed explanations on pages 53 to 55.
[On], [Off]
When this setting is set to [On], the camera supplies power to a plug-in power
microphone connected to the MIC terminal (A 60).
IMPORTANT
• Supplying power to a microphone without plug-in power functionality may
damage the microphone.
[-12dB], [-18dB], [-20dB], [Off]
Outputs a 1-kHz audio reference signal from the 3G/HD-SDI terminals and
HDMI OUT terminal.
[Level A], [Level B]
Allows you to select a 3G-SDI mapping level, as defined by the SMPTE ST
425-1 standard, for the video output signal of the 3G/HD-SDI terminals.
[Activate]
[On], [Off]
When this setting is set to [On], you can use an assignable button set to
[External Rec] or an optional RC-V100 Remote Controller to output a recording
command to an external recorder connected to the camera to start or stop
recording (A 57).
[Remove OSD]
[On], [Off]
When this setting is set to [On], the camera's onscreen displays will be turned
off automatically while a recording command is being output.
[All Settings]
[Cancel], [OK]
Resets all the camera's settings to default settings, except for the hour meters
displayed in the [Other Functions] > [Reset Hour Meter] submenu.
[Camera Settings]
[Cancel], [OK]
Resets the white balance, iris, gain, shutter speed, ND filter, custom picture,
focus limit and other shooting-related settings to default settings.
Submenu / Setting options
Submenu / Setting options
Submenu / Setting options
Advertisement
Table of Contents
