Table of Contents
Advertisement
White Balance
Custom White Balance
1 Set the camera mode to [Manual] (A 31).
2 Press SET.
• One of the adjustable settings will be highlighted
in orange on the screen.
3 Push the joystick left/right to select the current
40
white balance setting.
4 Push the joystick up/down to select [WB-A] or
[WB-B] and then press SET.
• If a custom white balance has been stored
previously, pressing the joystick will apply the
stored custom white balance. You do not need
to perform the rest of the procedure.
• If a custom white balance has not yet been stored, the custom white balance display [WB-A] or
[WB-B] and default value will flash slowly. Continue the procedure to establish the custom white
balance.
5 Point the camera at a gray card or white object so that it fills the whole screen.
• Use the same lighting conditions you plan to use when shooting.
6 Press the SET WB button.
• [WB-A] or [WB-B] will flash quickly.
• Make sure the gray card or white object fills the screen until the procedure is completed.
• Once [WB-A] or [WB-B] stops flashing, the procedure is completed. The setting is retained even if
you turn off the camera.
NOTES
• Readjust the custom white balance if the light source or ND filter setting changes.
• Very rarely and depending on the light source, [WB-A] or [WB-B] may keep flashing (it will change to
a slow flashing). The result will still be better than with the auto white balance.
Color Temperature/Preset White Balance
1 Set the camera mode to [Manual] (A 31).
2 Press SET.
• One of the adjustable settings will be highlighted in orange on the screen.
3 Push the joystick left/right to select the current white balance setting.
4 Push the joystick up/down to select [Kelv] (color temperature setting), or [Dylt] or [Tung]
(preset white balance).
• To change the color temperature or to further adjust the preset white balance, continue to step 5.
Otherwise, press SET (the rest of the procedure is not necessary).
Advertisement
Table of Contents
