Table of Contents
Advertisement
Onscreen Warning Displays and Messages
Refer to this section if a warning display or message appears on the screen. Should the camera fail to
operate correctly, consult a Canon Service Center.
[Temp.] appears in red on the screen.
- The camera's internal temperature has risen to a predetermined level. Set [Other Functions] >
[Fan Speed] to [Automatic] or [High]. If [Temp.] continues to appear on the screen after a period
of time, turn off the camera and wait until the temperature has decreased. If that does not solve
the problem, consult a Canon Service Center.
[Fan] appears in red on the screen.
- The cooling fan may not be working properly. Consult a Canon Service Center.
[Lens] appears in red on the screen.
- There was a communication error between the camera and the lens. Turn the camera off and
then on again. Alternatively, turn off the camera, remove the lens, and clean the lens's contact.
Next, reattach the lens. If that does not solve the problem, consult a Canon Service Center.
[ABB error] appears on the screen.
- An error occurred while the camera was automatically adjusting the black balance. Make sure
that the body cap or a compatible CINE-SERVO lens (A 71) is firmly attached to the camera
blocking light from entering the camera. Next, perform the operation again. If that does not
solve the problem, consult a Canon Service Center.
Built-in Rechargeable Lithium Battery
The camera has a built-in rechargeable lithium battery to keep the date/time and other settings. The
built-in lithium battery is recharged while you use the camera; however, it will discharge completely if
you do not use the camera for about 3 months.
To recharge the built-in lithium battery: Power the camera with an external power supply for 24 hours
while the camera is turned off.
Menu Options
67
Advertisement
Table of Contents
