Table of Contents
Advertisement
Menu Options
Menu item
[Aspect Marker]
66
[Custom Display]
[Camera Name]
[Reset Hour Meter]
[Initialize Media]
[Firmware]
[Activate]
[On], [Off]
Turns the onscreen aspect marker on/off (A 47).
[Color]
[Black], [Gray], [White]
Determines the color of the aspect marker.
[Ratio]
[4:3], [1.66:1], [1.85:1], [2.39:1]
Determines the aspect ratio indicated by the aspect marker.
[Camera Name]
[On], [Off]
[Date/Time]
[Date/Time], [Time], [Date], [Off]
[Continuous AF]
[On], [Off]
[White Balance]
[On], [Off]
[Camera Mode]
[On], [Off]
[Iris]
[On], [Off]
[Gain]
[On], [Off]
[Shutter Speed]
[On], [Off]
[ND Filter/Infrared]
[On], [Off]
[Custom Picture]
[On], [Off]
[Lens Error]
[On], [Off]
[Temperature Warning]
[On], [Off]
These settings allow you to customize the shooting screen by turning on/off
individual onscreen displays (A 56). For details about the onscreen displays
that each setting controls, refer to Onscreen Displays (A 28).
[Date/Time]: Allows you display the date and/or time on the shooting screen.
[ ] (space), [A] to [Z], [a] to [z], numbers, special characters, [Set]
Allows you to enter a name (up to 16 characters) to identify the camera. The
camera name will appear on the screen by default.
Push the joystick up/down to select the desired character and then press SET
to move to the next field. You can press MENU to delete a character. When
finished, select [Set] and then press SET.
[Cancel], [OK]
The camera has two "hour meters" – the first keeps track of total operation
time and the second keeps track of operation time since the last time the
second hour meter was reset with this setting.
(Used only for firmware updates.)
Initializes the microSD card used when updating the firmware. This menu
option is usually unavailable.
–
You can verify the current version of the camera's firmware. This menu option is
usually unavailable.
Submenu / Setting options
Advertisement
Table of Contents
