Table of Contents
Advertisement
Continuous AF
The camera will focus automatically on a subject at the center of the screen.
1 Set the focus mode switch on the lens to AF.
• On a compatible CINE-SERVO lens (A 71), set the
focus operation change-over knob to SERVO.
2 Set the AF mode to [Continuous (Always On)] or
[Continuous (Auto Off)].
[Camera Setup] > [AF Mode] > [Continuous (Always
On)] or [Continuous (Auto Off)]
• [C. AF] will appear on the left of the screen.
• When continuous AF has stopped working or cannot be used, [C. AF] will turn gray.
NOTES
• When shooting in dark surroundings with the camera mode set to [Auto], the camera may keep
endlessly trying to focus unsuccessfully. You can set [AF Mode] to [Continuous (Auto Off)] to
deactivate the autofocus function if this happens and avoid unreliable focus operations.
• Continuous AF will not work in the following cases.
- When using an EF lens that does not have a focus mode switch.
- While adjusting the aperture.
- If [AF Mode] is set to [Continuous (Auto Off)], when shooting in dark surroundings with the camera
mode set to [Auto].
- While adjusting the focus using a remote controller connected to the REMOTE terminal.
Adjusting the Focus
[Camera Setup]
[AF Mode]
[One Shot]
45
Advertisement
Table of Contents
