Chapter 2. Get Started - Lenovo ThinkSystem SD530 Manual
Server with intel xeon sp (1st, 2nd gen) uefi manual
Hide thumbs
Also See for ThinkSystem SD530:
- Quick start (2 pages) ,
- Quick start (2 pages) ,
- Manual (66 pages)
Table of Contents
Advertisement
Chapter 2. Get started
First launch
Perform the following steps to first launch the UEFI setup utilities.
1. (Optional)Connect the local keyboard, video, and mouse (KVM) to the server using a cable, or open the
Remote Console page on the Lenovo XClarity Controller web user interface (XCC WebUI).
2. Power on the system and press F1.
3. If you have set the power on password, enter the correct password.
4. Wait for about 90 seconds, the setup utilities window is displayed.
© Copyright Lenovo 2020
3
Hide quick links:
Advertisement
Table of Contents
