Lenovo ThinkSystem SD530 Manual page 57

Table 15. User security details (continued)
Clear Administrator Password
Password Rule and Policy
Item
Minimum password length
Password expiration period
Password expiration warning
period
Minimum password change
interval
Minimum password reuse
cycle
• Passwords are not the same
Press Enter to Continue
• Incorrect Password
Press Enter to Continue
• Passwords operation have unknown problem.
Press Enter to Continue
When IPMI command has no response then pop out this
message.
N/A Clear the Administrator password.
Clicking the button, pop-up message box will show up.
• An existing Administrative Password will be deleted
• Administrative Password has been cleared
Press Enter to Continue
• Administrative Password is not set
Press Enter to Continue
Function
Options
8~20 Input a value from 8 to 20. The minimum number of
characters that can be used to specify a valid password.
0~365 Input a value from 0 to 365. The number of days a
password may be used before it must be changed. If set
to 0 the passwords never expire.
0~365 Input a value from 0 to 365. The number of days before
receiving a warning about the expiration of the password.
If set to 0 the passwords never warned.
0~240 Input a value from 0 to 240. The number of hours that
must elapse before changing a password. The value
specified for this setting cannot exceed the value
specified for the "Password expiration period". If set to 0
the passwords may be changed immediately.
0~10 Input a value from 0 to 10. The minimum number of times
a unique password must be set before reusing a previous
password. If set to 0 the passwords may be reused
immediately.
<ENTER> Continue. <ESC> Return to Setup Utility
successfully
.
Chapter 3 System configuration and boot management
53