Lenovo ThinkSystem SD530 Manual page 16

Onboard LAN Port 1 (The
number of "Onboard LAN Port x"
varies with PHY card.)
Slot 1 (Display depending on
which riser card is installed.)
Set Option ROM Execution Order
Item
Set Option ROM Execution
Order
Notes:
• 1. "Onboard LAN Port x"
depends on whether PHY card
is installed or not.
• 2. Slot 1~3 and Slot 5~6 will
display depending on which
riser card is installed.
PCIe Gen1/Gen2/Gen3 Speed Selection
Item
Slot 1 (Display depending on
which riser card is installed.)
12
ThinkSystem Server with Intel Xeon SP (1st, 2nd Gen) UEFI Manual
Select whether UEFI or legacy option ROM of this device
• Auto
will be executed. [Disable] means both UEFI and legacy
• Disable
option ROM will not be executed. [UEFI] means only UEFI
option ROM will be executed. [Legacy] means only legacy
• UEFI
option ROM will be executed. [Auto] means option ROMs
• Legacy
will be executed based on "System Boot Mode", UEFI or
legacy. When [Legacy] is selected, "Onboard Video" will
also be changed to [Legacy] automatically and cannot be
changed to other options. Auto is the default setting.
When card installed:
• Auto
• Disable
Select whether UEFI or legacy option ROM of this device
will be executed. [Disable] means both UEFI and legacy
• UEFI
option ROM will not be executed. [UEFI] means only UEFI
• Legacy
option ROM will be executed. [Legacy] means only legacy
option ROM will be executed. [Auto] means option ROMs
will be executed based on "System Boot Mode", UEFI or
legacy. When [Legacy] is selected, "Onboard Video" will
also be changed to [Legacy] automatically and cannot be
changed to other options.
When there is NO card installed: Slot is empty
Auto is the default setting.
Options Description
Select the load order for legacy PCI option ROM(s). Use
• Onboard Video
the + key to execute the selected devices ROM sooner or
• Onboard SATA
– key to execute later.
• Onboard sSATA
• Onboard LAN
• Slot 1
• Slot 2
• Slot 3
• Slot 4
• Slot 5
• Slot 6
• Slot 7
• Slot 8
Description
Options
Set the PCIe slot as Generation 1 or Generation 2 or
• Gen1
Generation 3.
• Gen2
Note: Some adapters may not operate correctly in Gen2
• Gen3
or Gen3. Make sure to power off and power on the
system for these settings to take effect.