SYSTEM SETTINGS
4. ETHERNET DRIVER
1. AUTO DETECT
AUTO
MANUAL
1. DUPLEX
2. ETHERNET
TYPE
5. VIEW IP ADDRESS
1. IP ADDRESS
2. SUBNET MASK
3. GATEWAY
ADDRESS
6. STARTUP TIME SET.
Specifies the type of network connection.
Selects the detection method of Ethernet driver.
Sets the machine to determine the communication mode
(Half duplex/Full duplex) and Ethernet type (10Base-T/
100Base-TX) automatically.
Sets the communication mode and Ethernet type manually.
Selects the communication mode.
– HALF DUPLEX
– FULL DUPLEX
Selects the Ethernet type.
– 10 BASE-T
– 100 BASE-TX
Checks the current network settings.
Checks the IP address.
Checks the subnet mask.
Checks the gateway address.
Sets the time period required to delay the startup of network
communications for the machine (0-300 sec.).
13-34