Direct Sending - Canon imageCLASS MF6500 Series Basic Manual

Direct Sending

With direct sending, the machine sends the document on the ADF as it scans
one page, without storing all pages into memory at once. You can send a
document ahead of other documents stored in memory.
NOTE
– You cannot use the platen glass for direct sending.
– You cannot use group dialing for direct sending.
– With direct sending, the machine scans one page into memory at once and sends it right away.
Therefore, when <MEMORY FULL> is displayed, even if you have selected direct sending, wait until
there is enough space in memory to scan one page, or delete the documents in memory, and try again.
(See Chapter 5, "System Monitor," in the Advanced Guide.)
2
3
Direct TX
01
05
09
1
Load the document in the ADF.
2
Press [FAX].
3
Press [Direct TX].
To cancel direct sending, press [Direct TX] again.
Coded Address
Pause Hook Redial Dial Book
02 03 04
06 07 08
10 11 12
COPY FAX SCAN
Paper
Select
OK
Image Quality Density Enlarge/Reduce
System View
@./
Monitor Settings
1
Reset Collate GHI
4
PQRS
Additional 2 on 1
Functions
7
Frame Erase
Two-Sided
To
4-36