SYSTEM SETTINGS
2. IP ADDRESS
3. SUBNET MASK
4. GATEWAY
ADDRESS
5. USE LPD
6. RAW SETTINGS
ON
1. PORT NO.
2. USE
BIDIRECTIONAL
OFF
7. USE HTTP
13-31
Registers a fixed IP address to the machine. (See
"Installing/Uninstalling Software," in the Starter Guide.)
Registers a fixed subnet mask to the machine.
Registers a fixed gateway address to the machine.
Sets whether to use LPD as the print application.
– ON (PORT NO.)
– OFF
Sets whether to use RAW as the print application.
Enables to use RAW.
Enters the port number.
Sets whether to use bi-directional communication.
– ON
– OFF
Disables to use RAW.
Sets whether to activate HTTP (HyperText Transfer Protocol)
for the Remote UI.
– ON (PORT NO.)
– OFF