Precautions For Disassembly And Reassembly - Mitsubishi Electric MA-E100R-E Service Manual

Hide thumbs Also See for MA-E100R-E:
Table of Contents

Advertisement

15. Precations for Disassembly and Reassembly
The following precautions should be observed in order to perform disassembly and reassembly safely and
correctly.
The following categories describe hazards caused by mishandling and their levels.
WARNING
CAUTION
Meanings of graphic symbols are explained below.
Forbidden
Remove the power plug
from the outlet.
Failure to do so may cause electric
shock and/or injuries.
Do not touch a rotating
object until it completely
stops.
The rotating object may catch your
hand, etc., and result in injuries.
Check the wiring diagram
before wiring processing.
Failure to do so may cause ignition,
generation of smoke, and/or malfunction.
Do not alter the product.
This may cause fire, electric shock,
and/or injuries.
Use appropriate tools.
Failure to do so may result in an
accident caused by contact failure or
loose parts.
Do not damage or process
the power cord or lead wire.
This may cause fire, heat generation,
and/or electric shock.
Mishandling may result in fatal or serious injury, or fire.
Mishandling may result in injuries or damage to your home or property, etc.
Unplug
Do not touch
Check
No alteration
Use proper
tools
Forbidden
Always follow the
instructions
WARNING
When replacing parts, use
the specified parts listed on
the parts catalog.
Failure to do so may cause ignition,
generation of smoke, and/or malfunction.
Do not work with wet hands.
This may cause electric shock.
After the work, lay the wire
out as it was before.
Failure to do so may cause ignition,
generation of smoke, and/or malfunction.
Comply with the law.
Follow the applicable laws and regulations,
such as "Fire Prevention Ordinance" and
"Electric Equipment Technical Standards".
Failure to do so may cause fire and/or
electric shock.
Earth the product which
requires earthing correctly.
Incomplete earthing or connection to a
gas pipe, water pipe, etc. may cause an
explosion, ignition, and/or electric shock.
Replace the damaged or
deteriorated power cord or
lead wire.
Failure to do so may cause fire, heat
generation, and/or electric shock.
28
Alert
Return to
as it was
No wet hands
Return to
as it was
Obey the law
Earth
Replace

Advertisement

Table of Contents
loading

Table of Contents