(17) Removing and Replacing the Gear Motor
1 Remove the turntable.
→ (See "(14) Removing the Turntable".)
2 Remove the two bracket mounting screws
from the back of the turntable, and then pull
out the gear to remove it.
* When mounting the gear, align the the
D-cut of the gear and the matchmark of
the motor.
3 Remove the two gear motor mounting
screws, and then remove the connector from
the gear motor.
→ (Removing and Replacing the Gear
Motor)
Back of turntable
2
Bracket
2
3
Gear motor
3
40
Bracket
mounting
screw
Gear
Gear motor
mounting
screw
Connector
Gear motor