Safety Precautions - Mitsubishi Electric MA-EF503HS-U Instruction Manual

Safety precautions

The following displays categorize the degree of danger when mishandled.
WARNING
CAUTION
The following symbols are defined as follows:
Prohibited
Do not
disassemble
Do not repair,
disassemble or
modify.
Fire and/or electrical shock
may occur as a result.
For repair, contact your dealer of
purchase or Mitsubishi Electric.
Do not wash the Plasma
unit.
Using the Plasma unit when
wet may cause fire and/or
electrical shock.
Use an AC120V power outlet.
AC120V
Electrical shock, short circuit
and/or fire may occur as a
result.
2
Possibility of serious injury and even death, if mishandled.
Possibility of injury and damage to household furniture and surroundings.
Do not touch
Do not get wet
Do not damage the power cord.
Do not coat or bundle.
Do not place objects on top of
the cord.
Do not remove the power plug by
pulling on the cord.
Fire, electrical shock, and/or
damage may occur as a result.
Do not insert finger or
foreign objects into the
dust sensor.
Electrical shock may occur as
a result.
To reduce the risk of electric
shock, this equipment has a
polarized plug (one blade is
wider than the other). This plug
will fit in a polarized outlet only
one way. If the plug does not fit
fully in the outlet, reverse the
plug. If it still does not fit,
contact qualified personnel to
install the proper outlet. Do not
alter the plug in any way.
Do not use
near water
WARNING
Always follow
Remove the
power plug
Do not use damaged power cord
or plug. Do not use damaged
power outlet where the plug
cannot be inserted securely.
Electrical shock, short circuit
and/or fire may occur as a
result.
Remove the power plug
when cleaning.
Furthermore, never handle the
power plug with wet hands or
get the plug wet.
Electrical shock and/or injury
may occur as a result.
Periodically remove dust
from the power plug with a
dry cloth.
Dust build-up can cause bad
insulation and a fire may occur
as a result.