Disassembly And Reassembly - Mitsubishi Electric MA-E100R-E Service Manual

16. Disassembly and Reassembly

(1) Removing the Inlet Panel and Two Pre-filters
1 Pull the inlet panel toward you while pressing the
left and right levers at the bottom. Move the inlet
panel upward and then unhook it from the two
tabs on the upper part.
→ (Removing the Inlet Panel)
2 Hold the knobs and remove the two pre-filters
from the eight tabs.
→ (Removing the Two Pre-filters)
2
Lever
Knob
Pre-filter
Tab (8 places)
30
1
Inlet panel
2
Tab
Lever
Pre-filter