Mitsubishi Electric Y Series Manual page 211

BACnet
®
CITY MULTI can be easily combined with a Building Management System (BMS) via EW-50E (AE-200E). BACnet
an open transmission protocol widely used in BMS and related equipment control. CITY MULTI is compatible with
large-scale BMS management via BACnet
EW-50E (AE-200E) can control up to 50 units/groups (including Lossnay).
*To use the BACnet function on EW-50E (AE-200E), BACnet
®
• System example
BACnet ® /IP
• BACnet and M-NET adapter
®
FUNCTION CONTENT
Operation
ON/OFF ON/OFF
Mode Cool/Dry/Heat/Auto/Fan
Fan Speed Low-Mid2-Mid1-High-Auto
Air Direction Horizontal-Downblow 60%-80%-100%-Swing
Changes the set temperature.
Set Temperature * Set temperature range varies depending
on the indoor unit model.
Filter Sign Reset Normal/Reset
ON/OFF, Mode, Filter sign reset, Set temp,
Permit/Prohibit
Fan speed
Forced Off Reset/Execute
Ventilation Mode Heat Recovery/Bypass/Auto
Heating/Heating ECO/Hot Water/
Air to Water Mode
Anti-freeze/Cooling
.
®
license registration is required.
®
Central
monitor
LAN2
M-NET
EW-50E (AE-200E)
LAN2
M-NET
EW-50E (AE-200E)
LAN2
M-NET
EW-50E (AE-200E)
FUNCTION
Monitoring
ON/OFF
Mode
Fan Speed
Air Direction
Set Temperature
Filter Sign
Permit/Prohibit
Indoor Temperature
Alarm Signal
Error Code
Error Code Detail
Communication State
Ventilation Mode
Air to Water Mode
Apportioned Electric Energy
PI controller Electric Energy
Apportionment Parameter
Night Purge State
Thermo On/Off State
External Heat Source State
Trend Log
* To use this function, the license to charge, AE-200E (not connected to the M-NET), PI controller,
watt-hour meter with pulse transmitter (locally available one) are required.
CENTRALISED REMOTE CONTROLLER
BMS
M-NET
ME remote ME remote
controller controller
M-NET
Lossnay unit
ME remote
controller
M-NET
M-NET
ME remote ME remote
controller controller
M-NET
Lossnay unit
ME remote
controller
CONTENT
ON/OFF
Cool/Dry/Heat/Auto/Fan
Low-Mid2-Mid1-High-Auto
Horizontal-Downblow 60%-80%-100%-Swing
Changes the set temperature.
* Set temperature range varies depending on the indoor unit model.
ON/OFF
ON/OFF, Mode, Filter sign reset, Set temp, Fan speed
Temperature
Normal/Error
2 Character code- Indicates all unit alarms
4 Character code- Indicates all unit alarms
Normal/Error
Heat Recovery/Bypass/Auto
Heating/Heating ECO/Hot Water/Anti-freeze/Cooling
Group, Interlocked Units 0.1 kWh
0.1 kWh
Available*
ON/OFF
ON/OFF
ON/OFF
Indoor Temp, Apportioned Electric Energy, PI controller Electric Energy,
Apportionment Parameter
Dual Dual
is
®
Set Set
Point Point
Lossnay
remote
controller
Lossnay
remote
controller
211