Mitsubishi Electric Y Series Manual page 197

ME Remote Controller
Brightness sensor
PAR-U02MEDA
Dimensions : 140(W) x 120(H) x 25(D) mm
: 5-9/16(W) x 4-3/4(H) x 1(D) in.
• System configuration example
ME remote controller
• Functions
Item
ON/OFF Switches between ON and OFF.
Switches between Cool / Dry / Fan / Heat / Auto.
Operation mode switching Operation modes vary depending on the indoor unit model.
Auto mode is for CITY MULTI R2, and WR2-Series only.
Changes the set temperature.
Temperature setting
* Set temperature range varies depending on the indoor unit model.
Changes fan speed.
Fan speed setting
* Available fan speeds vary depending on the model.
Changes airflow direction.
Air flow direction setting
* Available airflow directions vary depending on the model.
The following operation can be prohibited by applying certain settings on the centralized controller: ON/OFF, operation mode
Allows/disallows local operation setting, temperature setting, fan speed, air direction, and filter sign reset.
* While an operation is prohibited, the operation icon lights up.
When an error occurs, an error code and the unit address appear.
Error information A contact number can be set to appear when an error occurs.
(The above information needs to be entered in the Service menu.)
Weekly ON/OFF times, operation mode, and set temperatures can be set.
Schedule (Weekly timer) • Time can be set in 5-minute increments. Up to 8 schedule patterns can be set per day of the week.
* Not valid when the ON/OFF timer is set.
ON/OFF timer
Turns ON and OFF daily at a set time.
• Time can be set in 5-minute increments. • It is also possible to set the ON time only or the OFF time only.
Timer
Auto-OFF timer
Turns off the unit after a certain period of operation.
• Operation time can be set to a value from 30 to 240 in 10-minute increments.
When vacancy is detected by the occupancy sensor, the energy-save control assist function is activated. Four control types
are available for selection:
Energy-save control during
ON/OFF/Set temperature/Fan speed/Thermo-off.
vacancy
The brightness sensor can be used in conjunction with the occupancy sensor to detect the occupancy/vacancy status more
accurately.
• Occupancy sensor
Dual Dual
Set Set
Detects vacancy for energy-save control.
Point Point
• Touch panel & backlit LCD
Shows the operation settings screen.
When the backlight is off, touching the panel turns on the backlight,
Occupancy
and it will stay lit for a prespecified period of time.
sensor
• LED indicator
Shows the operation status in different colors.
It lights up during normal operation, turns off when units are stopped,
and blinks when an error occurs.
• Brightness sensor
Detects the brightness of the room for energy-save control.
• Temperature & humidity sensor
Detects room temperature and relative humidity.
• Device control via AHC (Advanced HVAC Controller)
Allows control of other manufacturer's products connected via AHC.
• Auto (dual set point) modes
Two temperatures (one each for cooling and heating) can be set.
Occupancy
sensor
detection zone
ME remote controller
Description
INDIVIDUAL REMOTE CONTROLLER
Horizontal direction
Wall
Wall
Remote Remote
controller controller
110°
20°
:Each group
Operations
197
Vertical direction
11°
31°
10m
Floor
:Not available
Display