Mitsubishi Electric Y Series Manual page 139

Ceiling concealed type
High static pressure type
PEFY-P VMHS-E
• Technologies and functions
A wide range of external static pressure options to match A wide range of external static pressure options to match
virtually any application.
Maximum external static pressure of 250 Pa allows easy duct design
High external static pressure enables longer ducts for more flexibility in design.
PEFY-P VMHS-E P40 P50 P63
External static
50 – <100> – <150> – <200>
pressure (Pa)
PEFY-P VMHS-E
<50> – <100> – 150 – <200> – <250>
External static pressure (Pa)
The factory setting of external static pressure is shown without brackets
(< >).
Refer to "Fan characteristics curves" according to external static
pressure, in the DATA BOOK for the usable range of airflow rate.
Drain pump (option) lifts drain water up to 550 mm−700 mm
*550 mm for P40−P140 VMHS, 700 mm for P200/P250VMHS models.
The introduction of an upper drain pump allows the drain
connection to be raised as high as 550 mm (21-11/16 in.)
for P40−P140VMHS models and 700 mm (27-9/16 in.) for
P200/P250VMHS models. Allowing more flexibility in
piping layout design and reducing horizontal piping
requirements.
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ P.167
Optional
P71 P80 P100 P125 P140
P200 P250
PEFY-P VMHS-E (P40-P140)
Drain pump ensures a lifting
height of up to 550 mm (P40−
P140VMHS models) or
700 mm (P200/P250 VMHS
models)
PEFY-P VMHS-E (P200/P250)
139