Remote Operation Adapter [Pac-Sf40Rm-E] - Mitsubishi Electric M Series Manual

1. CONTROLS

1-11. Remote Operation Adapter [PAC-SF40RM-E]

Figure
Specifications
Power
External dimensions (mm)
Exterior
Weight
Operating conditions
Connecting cable
(indoor unit)
Output signal
Number of Contacts
Contact capacity
Minimum load
Input signal
Number of Contacts
Input/output Type
signal cable
Diameter
(locally prepared)
Distance
* This kit cannot be used with a wireless remote controller.
Water leakage alarm will not be displayed if the unit is built into the ceiling (PDH)
Dimensions
2000
Hole for wall
installation
(2 places)
Due to continuing improvement, above specification may be subject to change without notice.
86
Supplied from indoor unit
160 x 70 x 30
Material: ABS resin, Color: Gray (Munsell 3.07Y 6.16/0.33)
200g
Indoor only Temperature: 0 to 40 , Humidity: 35 to 85%RH (no condensation)
5-wire (3 + 2) cable with connector (9-pin, 4-pin)
No-voltage "a" contact (relay contact method)
2 (Operation / Alarm)
200V AC (30V DC)/1A or less
10mA
Pulse signal (instantaneous non-voltage "a" contact), pulse width: 200ms or more
1 (start/stop)
CV, CVS, or equivalent sheathed vinyl cord/cable
Twisted: 0.5 to 1.25mm2, Single: Φ0.65 to Φ1.2mm
Output signal cable: Max. 100m
Input signal cable: Max. 10m (Extension relay must be used when exceeding 10m)
Unit : mm
160
15 130
M-Series - Controls (December 2016)
Descriptions
Extraction of non-voltage contact output.
*Use of optional [Remote Operation Adapter] and "remote display
panel" Part to be provided at your site) provides non-voltage con-
tact outputs of signals (operation, error) and operation/stop input
function.
Unable to use with wireless remote controller. (except for PKA-
RP·HAL/KAL)
Applicable Models
SLZ-KA09/12/15NA
SEZ-KD09/12/15/18NA4
Locally prepared cable
30 taking cut hole
PCA-A24/30/36/42KA6
PLA-A12/18/24/30/36/42BA6
PEA-A12/18AA6
PEAD-A24/30/36/42AA5
PVA-A30/36/42AA4
© 2016 Mitsubishi Electric US, Inc.