Mitsubishi Electric M Series Manual page 77

1. CONTROLS
8
1-7. Signal Receiver [PAR-SA9CA-E], cont.
[Fig. 8-12]
[Fig. 8-13]
A
[Fig. 8-14]
[Fig. 8-15]
Due to continuing improvement, above specification may be subject to change without notice.
© 2016 Mitsubishi Electric US, Inc.
B
1
1
2
8.4
D
C
A Screw (M4 x 30)
* When installing the lower case directly on the wall or the ceiling,
A
use wood screws.
1 Hang the cover to the upper hooks (2 places).
2 Mount the cover to the lower case
A
A Cross-section of upper hooks
M-Series - Controls (December 2016)
Insert the minus screwdriver toward the
arrow pointed and wrench it to remove the
cover.
A flat screwdriver whose width of blade is
between 4 and 7mm (5/32 - 9/32inch)
must be used.
A Thin-wall portion
B Bottom case
C Remote controller wire
D Conducting wire
77