Assembly With Screws - ABB Advant AC500 Manual

The disassembly is carried out in a reversed order.
1
1
Figure: Disassembly of the modules
Disassembly: Press obove and below, then remove the module.

Assembly with screws

If the Terminal Unit should be mounted with screws, a Wall Mounting Accessory TA526 must be inserted
at the rear side first. This plastic part prevents bending of the Terminal Unit while screwing on.
1
Figure: Fastening with screws of the Terminal Unit TU516 (as an example)
1 The Wall Mounting Accessory TA526 is snapped on the rear side of the Terminal Unit like a DIN rail.
The arrow points to the right side.
2 Accessory for wall mounting inserted
3 Terminal Unit, fastened with screws
____________________________________________________________________________________________________________
V2
AC500 Hardware
2
Rear view
1
Holes for
wall mounting
Rear view
2
1-17 System data
3
Front view
AC500 / Issued: 05.2007