Mounting And Disassembling The Terminal Units And The I/O Modules; Assembly On Din Rail - ABB Advant AC500 Manual

Mounting and disassembling the Terminal Units and the I/O modules

Assembly on DIN rail

Step 1: Mount DIN rail 7.5 mm or 15 mm
Step 2: Mount FBP Terminal Unit (TU505 or TU506)
Figure: Assembly of the FBP Terminal Unit (TU505 or TU506)
The FBP Terminal Unit is put on the DIN rail above and then snapped-in below. The disassembly is
carried out in a reversed order.
Figure: Disassembly of the FBP Terminal Unit (TU505 or TU506)
____________________________________________________________________________________________________________
V2
AC500 Hardware 1-14 System data
AC500 / Issued: 05.2007