Door Interlock (Di); Cylinder Lock (Cyl) And Castell Lock (Cal) - Mitsubishi Electric AE-SW Series Instruction Manual

Door interlock (DI)

< Procedures for releasing door interlock >
1
Even when the breaker is on, the interlock can be manually released.
For this purpose, make a hole 7 or more in diameter in the panel door. (See the following figure.)
5
When the breaker is on

Cylinder lock (CYL) and Castell Lock (CAL)

< Procedures for locking in off state >
1
Press the OFF button to turn off the ACB.
2
Hold down the OFF button and turn the key to the locking
side. Then, the key can be removed, and the breaker will
be locked in the off state.
OFF OFF
Fig. 18-2
E − 18
Door
Release
Fig. 18-1
OFF OFF
Lock
Fig. 18-3
Door hook
Direction A
Hole for releasing 7 or
(5)
more in diameter
< Releasing procedures >
1
Insert the key, and turn the key to the releasing side.
If the key cannot be turned smoothly, hold down the OFF
button and turn the key to the releasing side.
Fig. 18-4
Release
(mm)
40
View A
OFF OFF