Mitsubishi Electric G-50A Instruction Book page 23

(4) Copying schedule content to other groups
• The schedule pattern P1 to P3, weekly schedule pattern, set-back value or setting temperature of one group can
be recorded and copied to memory or to another desired group.
• Correction and modification can be easily performed after the copy operation is completed.
3 Press the
/
5 8
or (-).
4 Press the ENTER
switch one time to complete the setting. (The cursor will
move to the next setting position.)
5 Repeat operations 3 and 4 to assign the schedule pattern to each day.
NOTE:
When the No.4 function setting is set ON, P4 cannot be set.
(memory, memory read)
1 Display the original group on the weekly schedule setting screen.
2 Press the
3 Press the ENTER
switch one time to record the setting date in memory.
*To erase date from the memory, return to the user operation menu screen.
4 "M" is displayed in reverse with blinking.
5 Press the
GROUP
SELECT
be copied.
6 Press the
7 Press the ENTER
switch to set the contents which will be the same as the
setting data in memory.
The same contents are displayed.
The contents stored in memory can be copied to other groups any number
of times because these contents will not be erased even if the memory
read operation is used.
– 22 –
(CLOCK/PATTERN) switch to select P1 to P4
switch to move the cursor to "M".
switch to select the group to which the data is to
switch to move the cursor to "MR".