Mitsubishi Electric G-50A Instruction Book page 22

(2) Set-back values and setting temperature setting
• Setting the set-back values and setting temperature can be performed only when selecting either "SET BACK" or
"SET TEMP" on the user setting screen in the initial setting mode.
• Set-back operation
Set-back operation is a method which reduces the air conditioner running cost by controlling the operation with
specified time band for lowered load. In other words the unit operates at a few degrees higher for cooling and a few
degrees lower for heating in the specified time band.
<<EXAMPLE>>
• Setting temperature operation
This operation sets the temperature when timer ON is set to a predesignated temperature regardless of the
operation mode.
<Set-back operation selected>
Set-back value
Reference temperature
* The selecting range:
• The reference temperature for set-back operation
• The set-back value
• The setting temperature : 19˚C ~ 28˚C (1˚C unit) / 67˚F ~ 83˚F (2˚F unit)
(3) Weekly schedule setting
The schedule pattern P1 to P3, local remote control prohibition (P4),
P1 to P3 and P4, and non-timer operation (-) are set for each day.
When the reference temperature is 24˚C / 75˚F and the set-back value is set to 2˚C / 4˚F.
• Cooling operation: 24˚C+2˚C=26˚C / 75˚F+4˚F=79˚F
• Heating operation: 24˚C-2˚C=22˚C / 75˚F-4˚F=71˚F
<Setting temperature selected>
Setting temperature
: 19˚C ~ 28˚C (1˚C unit) / 67˚F ~ 83˚F (2˚F unit)
: 0 ~ 9 degree (1 degree unit)
/ 0 ~ 18 degree (2 degree unit)
1 Press the
schedule setting.
2 Press the
position to be set.
to
switch to display the group in desired weekly
GROUP
SELECT
– 21 –
1 Press the
switch to move the cursor posi-
tion to the set-back reference
temperature or setting tempera-
ture.
NOTE: The temperature display
can be switched between
Celsius (°C) or Fahrenheit
(°F) (page 34).
2 Press the
5
(CLOCK/PATTERN) switch to
select the following items.
• Set-back value;
The reference temperature and
set-back value for each ON time
period are selected.
• Setting temperature:
The setting temperature for each
ON time period is selected.
3 Press the ENTER
setting.
4 Repeat operations 2 and 3 to
set the set-back value or setting
temperature for each ON/OFF
schedule.
BACK
5 Press the switch, when fin-
SCREEN
ished.
of a composite pattern composed of
switch to move the cursor to the pattern
/
8
switch to make