Mitsubishi Electric G-50A Instruction Book page 21

(1) Schedule pattern (P1~P3) setting
• Follow the procedures described below to set each daily schedule pattern for each group.
• The setting temperature or set-back values setting are also performed in the schedule setting operation. To enter
the setting temperature or set-back value setting select SET-BACK or SET TEMP. Accordance with section "5-7
User setting (page 34)" in advance.
• The setting temperature or set-back value selected in this way take effect only during timer operation. Also
setback operation is cancelled if the setting temperature is changed using this central controller or a local remote
controller.
(The set-back operation resumes at the next timer-ON time)
<Schedule pattern setting (P1 ~ P3,
NOTE:
• To disable a function beyond the date line, set the "Disable Start Time" to "00:00".
Also, item
)>
1 Press the
ting.
2 Press the
the pattern (P1 ~ P3,
3 Press the
4 The schedule pattern setting screen is displayed.
5 Press the
the first ON (PROHIBITION) time.
6 Press the
(Time is changed by 10 minutes unit.)
7 Press the
(The cursor moves to the next setting position.)
8 Perform operation 6 to select OFF (PERMISSION) time.
9 Perform operation 7 to set the OFF (PERMISSION) time.
0 Repeat operation 6 to 9 to set the second and third ON/OFF
(PROHIBITION/PERMISSION) schedules in the same manner.
When the second or third ON/OFF (PROHIBITION/PERMISSION)
schedule is not used, the characters "– –:– –" remain display and press
the ENTER
A To cancel the ON/OFF (PROHIBITION/PERMISSION) time that was set
previously, use the
the time position to be cancelled and press the
B When the P1 setting are completed, perform operation 2 to A as
necessary to perform the setting for P2 or P3 or
must be enabled for both dates.
– 20 –
switch to display the group in desired a timer set-
GROUP
SELECT
) to be setting.
ENTER
switch one time.
CLOCK / PATTERN
switch to select the ON (PROHIBITION) time.
/
5 8
ENTER switch one time to set ON (PROHIBITION) schedule.
switch one time.
switch to move the cursor position to
switch to move the cursor position to
switch to move the cursor to
RESET
switch.
DEL.
.