Table of Contents
Advertisement
Cleaning and care
Cleaning the door seal
Risk of damage as a result of
incorrect cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned
regularly with clean water and then
wiped dry with a cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
Replacing the Active AirClean
filters
The Active AirClean filters in the
refrigerator section need to be replaced
approx. every 6 months.
Change Active AirClean filter
the display.
Confirm the message with OK.
To remove the holder for the Active
AirClean filters, press against the
retainers on both sides of the holder
94
Remove the used Active AirClean
To replace the holder, press against
Once the Active AirClean filters have
been replaced, the Active AirClean filter
display must be reset using Settings
mode on the display (see "Selecting
additional settings – Resetting the
will appear on
Display Active AirClean filter
from the rear and pull the holder
downwards diagonally from the
frame.
filters and place the new Active
AirClean filters with the surrounding
edge pointing downwards in the
holder.
the retainers on both sides of the
holder from the rear and clamp it into
the gap on the frame from below.
The holder can be fixed under any
shelf in the refrigerator section.
New Active AirClean filters can be
obtained from your Miele Dealer.
").
Advertisement
Table of Contents
