Miele K 2601 V Operating And Installation Instructions page 10

Table of Contents

Advertisement

Warning and Safety instructions
For safety reasons, this appliance may only be used after it has
been built in.
The appliance must be isolated from the electricity supply during
installation, maintenance and repair work.
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.
While the appliance is under warranty, repairs should only be
undertaken by a Miele authorised technician. Otherwise the warranty
is invalidated.
Faulty components must only be replaced with genuine Miele
original spare parts. Miele can only guarantee the safety standards of
the appliance when Miele replacement parts are used.
This refrigeration appliance is supplied with a special lamp to
cope with particular conditions (e.g. temperature, moisture, chemical
resistance, abrasion resistance and vibration). This lamp must only
be used for the purpose for which it is intended. The lamp is not
suitable for room lighting. Replacement lamps may only be fitted by
a Miele authorised technician or by the Miele Customer Service
Department. This refrigeration appliance contains light sources rated
as energy efficiency class F.
Correct use
The appliance is designed for use within a certain climate range
(ambient temperatures), and should not be used outside this range.
The climate range for your appliance is stated on the data plate
inside the appliance. Installing it in a room with too low an ambient
temperature, e.g. a garage, will lead to the appliance switching off
for longer periods so that it cannot maintain the required
temperature.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

K 2611 viK 2801 viK 2811 viK 2901 viK 2911 vi

Table of Contents