Load-Bearing Capacity Of The Niche Floor; Ventilation; Door Hinging - Miele K 2601 V Operating And Installation Instructions

Load-bearing capacity of the niche
floor
To ensure the safe installation of the
refrigeration appliance and to guarantee
its correct functioning, the floor of the
niche where the appliance is to be
installed must be smooth and even.
It must be made from strong, rigid
material.
Because the refrigeration appliance is
extremely heavy when fully loaded, it is
essential that the floor it stands on is
able to bear its weight. If necessary,
seek the advice of an architect or
construction expert.
When fully loaded, the weight of the
refrigeration appliance is approx.:
K 2601 Vi, K 2611 Vi
K 2801 Vi, K 2811 Vi
K 2901 Vi, K 2911 Vi

Ventilation


insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the
compressor will run more frequently
and for longer periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.
325 kg
380 kg

Door hinging

448 kg

changing the door hinges.
Changing the door hinges single-
handedly can cause damage to the
appliance and injury.
The refrigeration appliance is
supplied with fixed hinges. Under no
circumstances should you attempt to
change the door hinges yourself.
If you need to change the door
hinges to the other side, please
contact your Miele Dealer.
Risk of fire and damage due to
Risk of damage and injury when
Installation
17