Selecting additional settings
– Adjusting the duration of the
AutoClose function
You can also adjust the duration for
how long the appliance door will remain
open until it closes automatically.
In Settings mode , use the
and sensor controls to select
assistant
and select OK to confirm
your selection.
In Settings mode , use the
and sensor controls to
select
AutoClose
confirm your selection.
Use the and sensor controls to
select the duration (5 to 30 seconds)
and touch OK to confirm your
selection.
To protect against inadvertent
opening: if you do not pull the
appliance open, it will close again by
itself after a duration defined by you.
Switching on Pull2open
In Settings mode , use the
and sensor controls to select
and select OK to confirm
assistant
your selection.
Use the and sensor controls to
select
Mode
and select OK to confirm
your selection.
Use the and sensor controls to
select
Pull2open
confirm your selection.
Touch the sensor control to return
to the previous menu level.
66
Door
and select OK to
Door
and select OK to
– Adjusting the intensity
You can also adjust the intensity of the
function. The lower the set
Pull2open
intensity, the less force required when
you pull the appliance door.
In Settings mode , use the
and sensor controls to select
assistant
and select OK to confirm
your selection.
In Settings mode , use the
and sensor controls to
select
Intensity
confirm your selection.
Use the and sensor controls to
select the right intensity (
) and select OK to confirm your
High
selection.
and select OK to
Low
,
Medium
Door
,