GE LOGIQ E9 Service Manual page 422

GE
D 5573152-100, R
IRECTION
8-6-6-3 Calibration and adjustments
No calibrations or adjustments are needed.
8-6-6-4 Verification
Perform the following steps to verify that the product is functioning as intended after this replacement:
1.) Power up the system to verify that it operates as intended.
2.) Operate all knobs and verify that they don't slip when operated.
8-6-6-5 Functional Checks
Perform the following functional checks to confirm the system is operational before returning the system
to the customer.
If all are successful, include the following debrief script: LOGIQ E9 Service Manual, Direction
5573152-100, Rev. 2. Equipment passed all required checks and is ready for use.
See:
Section
4-2-2
4-2-3
4-3-5
4-3-7
4-3-10
7-5-11-2
7-5-8-10
8 - 138
. 2
EV
Table 8-92 OP Panel Knobs replacement Functional Checks
Functional Check
Power ON/Boot Up
Power shut down
B-Mode Checks
System CFM and PWD Checks
Basic Measurements
Touch Panel Calibration Verification
I/O Board Tests
Section 8-6 - Replacing Top Console Parts
Debrief Script
LOGIQ E9 Service Manual, Direction
5573152-100, Rev. 2. Equipment passed all
required checks and is ready for use.
LOGIQ E9 S M
ERVICE ANUAL