GE LOGIQ E9 Service Manual page 179

GE
D 5573152-100, R
IRECTION
6-2-2 Access to Adjustments (cont'd)
Wide Screen Monitors:
Brightness and Contrast adjustments can be done via touchpanel encoders under Utilities screen
(Figure 6-2 "Wide Screen Monitors Brightness and Contrast adjustments" on page
All Monitor settings have been optimized at the factory, so normally, there should be no need for any
further adjustments.
Under special lighting conditions, you may want to adjust the Monitor screen's backlight intensity.
Factory default Intensity is: 100% (also depends on the Room Profile setting).
For complete information, refer to the appropriate version of the LOGIQ E9 Basic User Manual, Chapter
16, or the appropriate LOGIQ E9 Release Notes. See:
per LOGIQ E9 console" on page
Figure 6-2 Wide Screen Monitors Brightness and Contrast adjustments
To obtain test patterns for B/W or color adjustments, press Utility on the Touch Panel and select Test
Patterns.
. 2
EV
1-20.
Chapter 6 Service Adjustments
LOGIQ E9 S
Table 1-8 "Basic User Manual and Release Notes
M
ERVICE ANUAL
6-3).
6 - 3