Table of Contents
Advertisement
6 Routing Cables
6.12 Installing the Door Status Sensor Cable and Temperature
Sensor (Scenario Where the Battery Cabinet Is Deployed)
When you need to add a battery cabinet to the cabinet, perform this operation. Otherwise, skip this operation.
•
Remove the cable connected to the CCU or to the signal transfer box from the temperature sensor of the battery
•
compartment because the temperature sensor of the battery compartment is not needed, and reserve the cable for the
temperature sensor of the battery cabinet.
The door status sensor cable is available in 2 models. The door status sensor cable delivered with the battery cabinet is
•
of model A. The model A cable needs to be replaced by a model B cable when the CCU is used for cabinet monitoring.
Door status
sensor
Door status sensor cable of model A
Door status
sensor cable
Door status sensor cable of model B
Battery temperature sensor
56
Advertisement
Table of Contents
