Installing The Ac Input Power Cable - Huawei ACBox Series User Manual

ACBox 12-In 1-Out AC Combiner Box
User Manual
Figure 5-5 Connecting a PE cable
----End
Follow-up Procedure
To enhance the corrosion resistance of a ground terminal, apply silica gel or paint around the
terminal after connecting the PE cable.

5.6 Installing the AC Input Power Cable

Prerequisites
The AC input power cable and OT-M5 terminal are available.
Context
Connect the AC input power cable from the ACBox to input circuit breakers QF01 to QF12.
Recommended: Route the AC input power cables to input circuit breakers QF01 to QF06
through cable hole 1; route the AC input power cables to input circuit breakers QF07 to QF12
through cable hole 2.
Procedure
Step 1 Remove an appropriate length of the jacket and insulation layer from the AC input power
cable using a wire stripper.
Issue 03 (2018-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
29