Installing The Ac Output Power Cable; Secure The Terminal Block - Huawei SUN2000-15KTL-50KTL-M3 Series User Manual

Replacing SUN2000-(15KTL-50KTL) Series with
SUN2000-(15KTL-50KTL)-M3 Series
User Manual
Figure 6-37 Secure the terminal block
----End

6.3.3 Installing the AC Output Power Cable

Precautions
An AC switch must be installed on the AC side of the SUN2000 to ensure that the SUN2000
can be safely disconnected from the power grid.
Do not connect loads between the SUN2000 and the AC switch.


Procedure
Step 1 Connect the AC transfer cable to the AC terminals in the lower row of the AC adapter box.
Issue 01 (2021-04-05)
Use a socket wrench and extension rod to connect the AC power cable. The extension rod
must be longer than 150 mm.
Do not install third-party devices in the AC connection box.
There are two rows of AC terminals in the AC adapter box. The lower row is used to connect the AC
transfer cable between the AC adapter box and the SUN2000, and the upper row is used to connect the
AC output power cable on the user side.
Copyright © Huawei Technologies Co., Ltd.
6 Electrical Connections
72