Version Check Method; Version Upgrade History; Programming Tool Applicability; Applicable Versions Of Programming Tool - Mitsubishi Electric MELSEQ FX3S Series User Manual

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition
5.1.2

Version check method

The PLC version number can be checked by reading the last three digits of device D8001/D8101.
D8001/D8101
PLC type and
version
5.1.3

Version upgrade history

FX Series performed the following upgrade.
3S
Version Manufacturer's serial number
Ver. 1.00
Ver. 1.10
Ver. 1.20
5.2

Programming Tool Applicability

5.2.1

Applicable versions of programming tool

1. GX Works2
GX Works2 is applicable to FX
FX
3S
Ver. 1.00
2. FX-30P
FX-30P is applicable to FX
FX
3S
Ver. 1.00
5.2.2

In the case of programming tool (version) not applicable

Inapplicable programming tools can be used by selecting an alternative PLC model.
1. Alternative model setting
Model to be programmed
PLC
FX
3S
*1. "FX " is selected when the FX-10P(-E) is used.
2N
2. Contents of restrictions
• Programming is enabled only in the function range such as instructions, device ranges and program sizes
available in both the FX
• When the FX-10P(-E) is used, the function range such as instructions, device ranges and program sizes is
limited to that available in both the FX
• Use a programming tool that can select either FX
register capacity, etc.
• Memory capacity must be set to 4000 steps or less.
• Use a programming tool that can select the FX
2 8 1
PLC type (Example: 28=FX
133****
First product
(March, 2013)
•
13X****
•
(October, 2013)
14X****
•
(October, 2014)
PLCs from the following versions.
3S
PLC version
PLCs from the following version.
3S
PLC version
Model to be set
→
FX 3S
PLC and the PLC selected as the alternative model.
3S
PLC and the FX
3S
5 Version Information and Peripheral Equipment Connectability
0 0
Version information (Example: Ver. 1.00)
PLC)
3S
Contents of version upgrade
FX -30M/E-2AD (First product)
3S
Supports connection of following expansion boards:
FX 3G -4EX-BD, FX 3G -2EYT-BD
Supports connection of display module (FX
Applicable GX Works2 version
Ver. 1.492N or later
Applicable FX-30P version
Ver. 1.50 or later
Priority High → Low
→
FX 3G
PLC.
2N
to change parameters, i.e. memory capacity, file
3G
model to program using the built-in USB port.
3G
5.2 Programming Tool Applicability
3S -5DM).
*1 →
FX 1N FX 2N
1
2
3
4
5
6
7
8
*1
9
10
41