Mitsubishi Electric MELSEQ FX3S Series User Manual page 26

FX Series Programmable Controllers
3S
User's Manual - Hardware Edition
3. Display functions (display module)
(Supported in Ver. 1.20 or later)
FX -5DM Display Module (option) can be
3S
installed on the PLC.
[Monitor/test function]
Devices can be monitored and tested by
operating the buttons on the display module.
The button operations can be inhibited by the
user program.
[Other functions]
On the display module, you can set the time and
display error codes.
4. Communication and network functions
The expansion board and special adapter for
each communication function can be connected.
→ Refer to Data Communication Edition.
→ Refer to ENET-ADP User's Manual.
[Kinds of communication functions]
• Programming communication
(RS-232C/RS-422/USB)
• N:N Network
• Parallel link
• Computer link
• Inverter communication
• Non-protocol communication
(RS-232C/RS-485)
• MODBUS communication
• Ethernet
20
→ Refer to Chapter 16.
→ Refer to MODBUS Serial
Communication Edition.
5. Analog functions
The expansion board and special adapter for
each analog function are connected.
→ Refer to Analog Control Edition.
[Kinds of analog functions]
• Voltage/current input
• Voltage/current output
• Temperature sensor input (thermocouple and
platinum resistance thermometer sensor)
2 Features and Part Names
2.1 Major Features