Toro Reelmaster 3100-D Operator's Manual page 6

Note:
This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine. If possible,
keep the cutting units lowered to the ground while operating the
machine on slopes. Raising the cutting units while operating on
slopes can cause the machine to become unstable.
1. Tipping hazard—do not drive across slopes greater than
25°.
1. Crushing hazard of hands—stay away from moving parts;
read the Operator's Manual.
121-3628
133-8062
140-7461
decal121-3628
Some or all of these symbols are on your battery.
1. Explosion hazard
2. No fire, open flame, or
smoking
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection.
5. Read the Operator's
Manual.
decal133-8062
decal140-7461
6
Battery Symbols
6. Keep bystanders away
from the battery.
7. Wear eye protection;
explosive gases can
cause blindness and other
injuries.
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard
decalbatterysymbols