Huawei SmartACBox-12/1-JP User Manual page 63

SmartACBox 12-In 1-Out Smart AC Combiner Box
User Manual
Step 3 Log in as Advanced User. On the Settings tab page, choose Comm. Param. > Ethernet to
set Ethernet parameters.
Figure 6-4 Setting Ethernet parameters
Step 4 Log in as Advanced User. On the Settings tab page, choose Comm. Param. > RS485 to set
RS485 parameters.
Figure 6-5 Setting RS485 parameters
Step 5 Connect the SmartLogger1000 to the SUN2000L.
The SmartLogger1000 WebUI provides two methods to connect to the SUN2000L.

Issue 03 (2018-05-15)
 The SmartLogger1000 IP address must be in the same network segment as the router IP address.
 Set Subnet mask to 255.255.255.0.

Set Default gateway to the router IP address.
 Set DNS Server Address to the router IP address usually or to an address obtained from the network
carrier.

RS485-1–RS485-3 respectively correspond to communications ports COM1–COM3 on the
SmartLogger1000.

The values of Protocol, Parity, and Baud rate for the devices connecting to the same
communications port must be consistent.
Method 1: Searching for devices automatically
Copyright © Huawei Technologies Co., Ltd.
6 Operation
57