Embedded Webui - Huawei SmartACBox-12/1-JP User Manual

SmartACBox 12-In 1-Out Smart AC Combiner Box
User Manual

6.7.2 Embedded WebUI

Prerequisites
The SmartLogger1000 has connected to the PC over a router.
Procedure
Step 1 Enter https://XX.XX.XX.XX in the address box of the browser, and press Enter. The login
page is displayed, as shown in
Figure 6-3 WebUI login page
Step 2 Specify Language, User Name, and Password, and then click Log In.
If any page is blank or a menu cannot be accessed after you log in to the WebUI, clear the
cache, refresh the page, or log in again.
Issue 03 (2018-05-15)
This section uses the WebUIs for SmartLogger V100R001C00SPC111 as an example. The data on the
WebUI snapshots is for reference only.
XX.XX.XX.XX is the IP address for the SmartLogger1000. The default IP address is 192.168.0.10.
 Because of the permission restriction, log in as Advanced User or Special User.
 For the SmartLogger software versions that are SmartLogger V100R001C00SPC111 and later, the
initial password is Changeme.
 After the first login, it is recommended that you change the initial password immediately to ensure
account security.
 If you enter wrong passwords for six consecutive times in 5 minutes, your account will be locked out.
You have to try again with the account 10 minutes later.
Copyright © Huawei Technologies Co., Ltd.
Figure 6-3.
6 Operation
56