Huawei SmartACBox-12/1-JP User Manual page 46

SmartACBox 12-In 1-Out Smart AC Combiner Box
User Manual
Figure 5-10 Stripped length
Step 2 Crimp an OT terminal on the ground end.
Step 3 Disconnect cables JX02-1-BOT and JX02-2-BOT from the JX02 terminal block.
Insulate the disconnected cables JX02-1-BOT and JX02-2-BOT.
Step 4 Remove the gland from the AC INPUT cable gland at the bottom of the SmartACBox, and
remove the cap from the gland.
Step 5 Route the cable through the gland and then the AC INPUT cable gland, and finally to the
JX02 terminal block.
Figure 5-11 Connecting a single-phase power cable
----End
Issue 03 (2018-05-15) Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
40