SmartACBox 12-In 1-Out Smart AC Combiner Box
User Manual
Figure 4-8 Drilling holes
Step 3 Align the mounting bracket holes with the drilled holes, insert bolt assemblies (flat washers,
spring washers, and M12x40 bolts) into the holes through the mounting bracket, and secure
them using the supplied stainless steel nuts and flat washers.
Issue 03 (2018-05-15)
You are advised to apply anti-rust paint on the hole positions for protection.
M12x40 bolt assemblies are supplied with the SmartACBox.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
20