Finalizing And Verifying The Replacement Server Configuration - Hitachi NAS Platform 4000 Series Hardware Reference Manual

9. Click Yes to proceed past the Security Alert, and log in as admin (default password:
nasadmin).
10. Verify and, if necessary, convert the new server to the model profile required.
This step requires a separate process, training, and license keys. Contact Hitachi
Vantara Support Connect if the incorrect model arrives for replacement.
11. Navigate to Home > Server Settings > Firmware Package Management to verify
and, if necessary, upgrade the new server to the latest SU release.
12. Navigate to Home > Server Settings > Configuration Backup & Restore, select the
backup file you want, and click restore to restore the system from that backup file.
13. Reboot the server.
14. Reconnect the data cables to the server.
15. To uninstall the embedded SMU, log in as root and issue the command: smu-
uninstall
16. Navigate to Home > Server Settings > License Keys to load the license keys.
17. Remove the previous license keys and add the new keys.

Finalizing and verifying the replacement server configuration

The Fibre Channel (FC) link speed varies according to the server model. Use the
appropriate speed for your model.
HNAS 4040
HNAS 4060, 4080, and 4100
Hitachi NAS Platform and Hitachi Unified Storage Series 4000 Hardware Reference
Finalizing and verifying the replacement server configuration
Model
4 Gbps
8 Gbps
Appendix A: Server replacement procedures
Fibre Channel link speed
107