Menu - ABB SACE Emax 2 Manual

4 - Menu

Introduction Press Enter or ESC from the main page to access the different menus of the Trip unit.
Elements of each item The items in each list consist of:
Protections Menu The Protections menu can be used to configure the following protections
19 | © 2019 ABB | 1SDH001316R1002 - ECN000086501 - Rev. A
The menus are the 4th level pages that can be dislpayed and comprise list of:
• submenus
• settable parameters
• information and measurements
• commands that can be executed
Selection of each menu item enables: access to submenus, consultation of information in detail, configuration
of a parameter, execution of a command.
• main name (white color)
• additional description or set value (light blue color)
Figure 15
Name Parameters
L Description and list in manual 1SDH001330R1001
S Description and list in manual 1SDH001330R1001
S2 Description and list in manual 1SDH001330R1001
I Description and list in manual 1SDH001330R1001
G Description and list in manual 1SDH001330R1001
(2)
Gext Description and list in manual 1SDH001330R1001
(2)
Adaptive Protections
(1)
if the
where the set can be selected (Set A / Set B) will be available before the list of protections
(2)
available for LSIG versions
(3)
available if the presence of sensor S.G.R. has been activated previously
Dual set
package is available and
ABB | SACE Emax 2
:
(1)
SW package
Standard Protections
(3)
has been activated, an intermediate menu
Interface and menus | 4 - Menu