Configuring The Usb Codec - microHAM DIGI KEYER Manual

Windows will automatically install the USB Audio
Device driver to support the USB Audio CODEC in
DIGI KEYER.
microHAM © 2006 All rights reserved
Configuring the USB Audio CODEC
7
Windows automatically selects any newly installed
Audio Device as the default device for Sound
Playback and Sound recording. This is undesirable
as Windows Sounds would be played through DIGI
KEYER and onto the air!
Open "Sounds and Audio Devices" in Control Panel
and reset the Default device for Sound Playback
and Sound Recording to your computer's primary
sound device.