Installing The Usb Driver - microHAM DIGI KEYER Manual

Connect the USB cable to the DIGI KEYER USB
jack, plug the other end of the USB cable into an
open USB port in your computer.
Now, click Install from specific location and use the
path to the Router installation directory.
If the USB driver is successfully installed, you should see a "microHAM USB Device" driver in Universal
Serial Bus controllers section of Windows Device Manager without any exclamation mark.
microHAM © 2006 All rights reserved

Installing the USB DRIVER

The automatic Wizard will appear, insert the
installation CD into the CDROM drive and select
"No, not this time" when asked to connect to
Windows Update. Then click "Next."
The default path is:
C:\Program Files\microHAM\drivers\d2xx
Wait until the driver is copied.
During installation on Windows XP a driver
certification dialog will appear. Ignore this message
and click "Continue Anyway".
6